- FIRMWARE UPDATE FOR BCR 2000 DRIVERS
- FIRMWARE UPDATE FOR BCR 2000 UPGRADE
- FIRMWARE UPDATE FOR BCR 2000 DOWNLOAD
- FIRMWARE UPDATE FOR BCR 2000 MAC
Send these files to the "info" account at this website as attachments. Verify that the output file has a size of exactly 82,688 bytes. Select all 272 received messages via Edit -> "Select all", then execute File -> "Save system exclusive messages" to e.g. The "MIDI input messages" window should now have received exactly 272 messages, each of length 304. Press the Play button and wait until the "Sending selected message(s)" dialog box closes. Select (highlight) all 272 messages via Edit -> "Select all" (or by pressing the blue/white "hamburger" icon on the toolbar). This should lead to a list of exactly 272 SysEx messages, each consisting of 10 bytes. Open BCF_Get_Firmware.syx or BCR_Get_Firmware.syx (as appropriate) via File -> Insert. (With a shorter delay, the BCF/BCR might not be able to keep up, so you might not get all the required firmware messages back.) Important: "Delay/messages (ms)" should be at least 100 (this is the default). In the "MIDI System Exclusive messages" window, set "Output device" to the device to which the BCF/BCR with 1.04 is connected. In the main window, open View -> MIDI -> "System Exclusive messages". In the "MIDI input messages" window, press "Record". In the main window of BC Manager, open View -> MIDI -> "Input messages (general)". (I'm a bit of a BCF/BCR firmware collector, and these will help me if I ever get down to improving the firmware.) FIRMWARE UPDATE FOR BCR 2000 DOWNLOAD
However, I would appreciate it very much if you first download the 1.04 firmwares from your BCF and BCR and send them to me. If the BCF/BCR with firmware 1.04 is indeed listed in the B-Controls window, you're in business, and you can upload new firmware to this device. (If I remember correctly, the BCF's firmware 1.04 didn't have the emulation modes yet, so you shouldn't see any emulation mode under Personality.) You BCF/BCR with firmware 1.04 should now appear in the table, with the Personality column saying "B-Control" and the Firmware column "BCF/R2000 1.04".
From the B-Controls window, perform MIDI -> "Detect B-Controls". port 1" refer to the intermediary BCF/BCR itself, so you should definitely not enable those.) From the main window, open the Options -> "MIDI devices" dialog box, and enable only the input and output ports of the intermediary BCF/BCR that connect to the BCF/BCR with the 1.04 firmware, namely the input and output ports called something like "BCF/R2000 port 2". Switch on the BCF/BCR with 1.04 and set its operating mode to S-4. Switch on the intermediary BCF/BCR and set its operating mode to U-3. (It's probably best to leave the USB cable of the BCF/BCR with 1.04 unconnected.). Connect the USB cable of the intermediary BCF/BCR to the computer. Connect a MIDI cable from the MIDI OUT A of the BCF/BCR with 1.04 to the MIDI IN of the intermediary BCF/BCR. Connect a MIDI cable from the MIDI OUT A of the intermediary BCF/BCR (with 1.07/1.10) to the MIDI IN of the BCF/BCR with 1.04. You can even use a BCF/BCR with firmware 1.07/1.10 as intermediary: 
FIRMWARE UPDATE FOR BCR 2000 UPGRADE
In theory you could try to upload new firmware from Windows XP or so, but there is a much simpler solution: you can upgrade the firmware via standard MIDI cables connected to an "intermediate" MIDI-to-USB device.
FIRMWARE UPDATE FOR BCR 2000 DRIVERS
Then press push encoder 1 (the top-left one) to see the current value of the operating mode rotate the push encoder to change the value to "U-1".įinally press EXIT to leave Global Setup mode: the BCR's "USB MODE" LED (the rightmost of the 6 mini-LEDs) should then turn green.Ĭonsidering that 1.07 and 1.10 do work, the problem must indeed be that the macOS and Windows 10 drivers can't work with the BCF/BCR's 1.04 firmware. You can set the operating mode via the BCR's "Global Setup" mode, which you enter by holding the EDIT key, then pressing the STORE key: the display should say "EG". You say that the "USB ports are OK", but what exactly do you mean by this? How have you established this?Ī BCR can only receive/transmit data from/to the computer via the USB cable if the operating mode of the BCR has been set to a "U" mode (U-1/2/3/4), not to an "S" mode (S-1/2/3/4). It seems more likely that the BCR's operating mode is incorrect, or that there is a problem with the USB cable, or that the BCR's USB controller is defective. Usb ports are ok.Ĭonsidering that both macOS and Windows don't recognize your BCR, it doesn't seem likely that these operating systems' USB drivers for the BCR are to blame.
FIRMWARE UPDATE FOR BCR 2000 MAC
The BCR with 1.04 is not recognised by my mac or win 10 computers.
0 kommentar(er)
